|
|
|
|
Series
catalyst products |
|
|
| (1)
HNMCC-A
The catalyst is produced by using honeycomb
ceramics material as the supporter, special
material as the coat and noble metals (Palladium
and platinum) as the active component, which
possesses the advantages of high catalytic
activity, high thermal stability, long life,
low pressure drop and high intensity et
al. The performance of the catalyst is comparable
to that of roughly identical foreign products.
The catalyst can be widely applied in the
purification and deodorization of organic
waste gas, which releases from chemical
industry, manufacture of oil paint, enameled
wire, metal printing, multicolor printing
and leather, pharmaceutical industry and
municipal sewage. The catalyst can be especially
applied in the treatment of the waste gas
from acrylonitrile production device. |
|
HNMCCA-A technical indicators
|
Project |
Indicators |
|
Size（Long×Wide×High）
mm |
（148.5-151.5)×(148.5-151.5)×(49.5-50.5) |
| Surface
m2/g |
15～25 |
|
Compressive strength，MPa≥ |
10 |
| Apparent
density g/mL |
0.65～0.75 |
| Purification
indicators |
A non-hydrocarbon
content with less than 150 GB16297（mL/m3） |
HNMCC-A technical conditions
| Project |
Indicators |
| Use
catalyst temperature ℃ ≤ |
600 |
| Operating
pressure MPa ≤ |
0.5 |
| Gas
Kongsu h-1 |
15000～25000 |
| Mutilated
oxygen content （v/v),% ≥ |
0.5 |
|
| |
|
| （2）ＧＭＮＣＣ
The catalyst is produced by adopting
advanced nano-technology and using alumina
as the supporter and noble metals (Palladium
and platinum) as the active component, which
possesses the advantages of high catalytic
activity, good thermal stability and long
life. Trace hydrocarbon can be removed from
carbon dioxide in the devices used to produce
hydrogen, glycol, coal-gas in the oil refinery
industry The amount of hydrocarbon can be
reduced to less than 10 mL/m3 due to high
catalytic activity and thermal stability
of the catalyst. |
|
GMNCC technical
indicators
| Project |
Indicators |
| Surface
，m2/g |
100～140 |
| Compressive
strength，N/cm ≥ |
50 |
| Reactor
density，g/mL |
0.65～0.75 |
| Size（Waijing×Long），mm |
φ(2.2～3.2)×(5～15) |
| After
the total hydrocarbon content of PAH
catalytic delinking，mL/m3 |
Drive
consistent with the overall contentGB10621，<20 |
GMNCC technical conditions
Project |
Indicators |
Use
catalyst temperature，℃≤ |
600 |
Operating
pressure，MPa≤ |
3.0 |
Gas
Kongsu，h-1 |
3000～6000 |
|
Mutilated oxygen
content（v/v),% |
0.2 |
|
（3）ＨＮＭＣＣ－Ｐ
The catalyst is produced by using honeycomb
ceramics material as the supporter, composite
material formed by rare earth metals and
transition metals as the auxiliary reagent
and noble metals (Palladium and platinum)
as the active component, which possesses
the advantages of high catalytic activity,
high thermal stability, long life and high
intensity et al. The catalyst can be applied
in the purification of the waste gas released
from the device used to produce acrylic
acid in order to remove trace propylene,
propane, carbon monoxide and acrolein. |
| |
| HNMCC-P technical
indicators
Project |
Indicators
|
Size（Long×Wide×High），mm |
(148.5-151.5)×(148.5-151.5)×（49.5-50.5) |
Surface，m2/g |
15～25 |
Compressive
strength ，MPa ≥ |
10 |
Apparent
density，g/ml |
0.65～0.75 |
Purification
indicators |
Non-a
paraffin, morbidity, esters being
content with GB16297, less than 150
(mL/m3) |
HNMCC-P technical conditions
Project |
Indicators |
Use
catalyst temperature ，℃ ≤ |
650 |
Operating
pressure，MPa ≤ |
0.5 |
Gas
Kongsu ，h-1 |
15000～28000 |
Mutilated
oxygen content（v/v),% ≥ |
2.0 |
Water
vapour content（wt),% ≤ |
3.0 |
|
|
|
|
